How to Clean a Ninja Blender: Several Cleaning Methods and Step-by-Step Instructions

By
reviewed
Reviewed by
Last updatedLast updated: August 28, 2021
JuicersBlenders is reader-supported. We may earn a commission through products purchased using links on this page. Learn more about our process here

Ninja blenders fall in the category of the most popularly used blenders in the market today. This affordable blender comes with very powerful features and is a durable blender. Among its many features is its energy-saving capacity, and it is also effortless to clean after use. In this article, we will be looking at the step-by-step process of how to clean a Ninja blender and also some helpful safety tips.

Cleaning your blender the right way is very important, especially if you want to keep using it for a long time. It also safeguards your family’s health by ridding the blender of disease-causing bacteria.

Things you will need

How to Clean a Ninja Blender: Several Cleaning Methods and Step-by-Step InstructionsHere are some of the items you need to have ready before you start cleaning your Ninja blender.

What you’ll definitely need:

  • Dish soap
  • Sponge

Things you might need as well:

  • Lemon
  • Vinegar
  • Baking soda

Different cleaning methods

How to Clean a Ninja Blender: Several Cleaning Methods and Step-by-Step InstructionsIt is vital that you know simple DIY such as cleaning your blender Trusted Source Graphene 'wonder material' made with kitchen blender - BBC Graphene is thin, strong, flexible and electrically conductive, and has the potential to transform electronics as well as other technologies.
An Irish-UK team poured graphite powder (used in pencil leads) into a blender, then added water and dishwashing liquid, mixing at high speed.
www.bbc.com
 if you want to have all the food particles removed. There are several options when it comes to cleaning your blender. Some take time, while some make the job faster. The most important thing is results; you can choose to clean your blender using these options:

Dishwasher

You can’t wash the entire blender in a dishwasher, but you can take out some of its parts to clean it. Parts like the Ninja hard, blade, and lids are dishwasher safe. It is the easiest way to have the blender cleaned.

Self-cleaning

This method will require you to fill the jar with warm water and dish soap. Using the pulse function, you can have the blender clean itself.

Manual cleaning

You use this method if you want your Ninja blender thoroughly cleaned. It will require you disassembling the parts and then cleaning each part using your hands.

Now that we have identified the different cleaning methods, we will look in detail at the best way to regularly clean your Ninja blender.

Rinsing

After using your blender, you can fill it with warm water halfway. Add a little dish soap and then cover the lid. Place the blender on low power before turning it on and allow it to blend for at least one minute. Pour out the water, and then add another clean warm water inside the blender. Repeat the process without adding any dish soap to remove any food particles that may still be stuck in the blender.

Using lemon to remove difficult stains

If there are tough stains in the blender that won’t easily come off with the rinsing method, you can use lemon to remove them. Add warm water in the blender until it is half full and then add a little detergent along with a coarsely chopped lemon. Turn on the blender and let it work for a minute so the stains can come off easily.

Cleaning your Ninja blender step by step

In this section, we’ll walk through the cleaning process itself.

Disassembling the blender

How to Clean a Ninja Blender: Several Cleaning Methods and Step-by-Step InstructionsBefore you disassemble the blender, you need to unplug it from the power socket. Remove the parts carefully, so it doesn’t break or injure you. The user manual provides clear guidance on how to disassemble your Ninja blender. You should remove the lid and the Ninja jar but make sure you don’t detach the sealed gasket.

The Ninja blades are always sharp, so you need to be careful not to get your fingers on the edge of the blades.

Cleaning the Ninja jar

You can clean the jar of the blender using warm water and your sponge. You can use one of these Multi-Purpose Scrub Sponges, one of the best you can find and what most people recommend. Make sure it is washed properly, and pay attention to the edges so you can get out the food residues that are stuck to it.

If you still notice tough stains after washing with your sponge, you can soak a mixture of the vinegar and baking soda for 3 hours to soften the stain before rewashing it.

You should wash the inside and outer sides of the jar along with the base of the jar. When you are done with the washing, run clean water to rinse it properly.

Cleaning smaller pieces

How to Clean a Ninja Blender: Several Cleaning Methods and Step-by-Step InstructionsYou also need to clean the little parts like the container base gasket latch, cutting edge, and blades. You can do this with warm soapy water and your sponge. You need to be careful when cleaning the blades to avoid it cutting your fingers. It is better to unscrew the blades before you begin to clean them. After washing these parts, run clean water to rinse them properly.

Air-drying the blender

When you finish washing all the parts of the blender, you need to make it dry. You can allow these parts to dry by themselves on your drying rack. It is vital that you don’t reassemble the parts if they’re not properly dried. If you assemble wet parts, it will cause condensation, which will aid the growth of bacteria. To prevent this from happening, make sure the blender parts are properly dried before putting them together.

Wiping the blender base

How to Clean a Ninja Blender: Several Cleaning Methods and Step-by-Step InstructionsYou can clean the base of the blender using a towel soaked in soapy water. Make sure you squeeze it so it is only damp and not drained with water. Use the damp cloth to wipe the base and clean off any food spills on it. Also, look out for any food residues around the corners because food tends to hide in those areas.

When cleaning the base, avoid soaking it in water to prevent damage. The base holds the sensitive part of the blender, which is the electric motor and the control functions. If water gets there, it will damage the blender.

Reassembling the blender

Now that everything part of the blender is clean and dried, you can reassemble it together. You should follow the instructions just as it is written in your Ninja blender user manual. When everything is set, you can then use your blender for your food.

Ninja blender cleaning tips

  • When cleaning, use dishwashing utensil like the OXO Good Grips Kitchen Appliance Cleaning Set to lift the blades of the blender to avoid direct contact with your fingers. This utensil is recommended by most users.
  • Use only proper dishwashing detergent to clean your blender; you can’t use just any detergent.
  • Remember to unplug the blender from the socket before you disassemble the parts. This will prevent a power surge from damaging your blender and protecting you from any harm.
  • Do not soak the base of the blender in water, and do not put it in your dishwasher. It will damage your blender.
  • Remember to assemble the blender only when all the parts are dry.

Final thoughts

Ninja blender is one of the best blending products you will find in the market today for your smoothies. We have covered everything about how to clean a Ninja blender safely. It is important that you clean your blender after each use. This helps it remains effective and also prevents contamination of your food. If you are having any challenges with disassembling and reassembling the blender parts, remember to look at the user manual.

We hope that you’ve been armed with enough helpful tips on cleaning your ninja blender.

References

1.
Graphene 'wonder material' made with kitchen blender - BBC
Graphene is thin, strong, flexible and electrically conductive, and has the potential to transform electronics as well as other technologies.
An Irish-UK team poured graphite powder (used in pencil leads) into a blender, then added water and dishwashing liquid, mixing at high speed.
Leave a Reply

Your email address will not be published. Required fields are marked *